Mudroom Built-Ins Cost
How much do mudroom built-ins cost in 2026? Custom mudroom locker, bench, and cabinet pricing by size and material. What materials and labor cost, how long they take to build, and how to quote mudroom built-in work for your clients.
Updated March 2026
Mudroom Built-In Cost by Configuration
The table below shows typical material costs, labor hours, and sale prices for custom mudroom built-in projects. Sale prices include sheet goods, solid lumber, hardware, labor at $80 to $100 per hour, overhead at 20 percent, and a 30 percent profit margin. On-site installation is included in labor hours.
| Configuration | Sale Price |
|---|---|
| Simple bench with open cubbies and coat hooks (6 ft wide, painted MDF) | $1,400 to $2,200 |
| 3-locker unit with bench and base storage (6 ft wide, painted) | $2,800 to $4,200 |
| 5-locker unit with bench and upper cabinets (10 ft wide, painted) | $5,800 to $9,000 |
| Full mudroom wall with 6 lockers, bench, upper cabinets (12 ft, painted) | $8,500 to $14,000 |
| Full mudroom wall with 6 lockers, bench, upper cabinets (12 ft, white oak) | $13,000 to $20,000 |
Note: Prices above reflect custom woodworker pricing, not big-box store or flat-pack estimates. Use the custom furniture pricing guide to build a precise cost using your actual shop rate and overhead.
Mudroom Built-Ins Cost Per Linear Foot
Per-linear-foot pricing is a useful starting point when a client asks for a budget range before final dimensions are set. These ranges assume a standard 8-foot ceiling and a locker depth of 14 to 16 inches.
| Configuration | Material | Cost Per Linear Foot |
|---|---|---|
| Open bench with cubbies and coat hooks | Painted MDF/poplar | $300 to $500 |
| Lockers with bench, no upper cabinets | Painted MDF/poplar | $450 to $700 |
| Lockers with bench and upper cabinets | Painted MDF/poplar | $600 to $1,000 |
| Lockers with bench, no upper cabinets | White oak, natural finish | $700 to $1,100 |
| Lockers with bench and upper cabinets | White oak, natural finish | $1,000 to $1,500 |
| Full mudroom wall with bench, lockers, upper cabs, and drawer base | Walnut | $1,400 to $2,200 |
These per-foot estimates are useful for initial client conversations but should always be replaced with a full line-item quote once dimensions are confirmed. Corner units, angled walls, sloped ceilings, and custom locker configurations require a case-by-case estimate.
Cost by Wood Species and Material
Mudroom built-ins use sheet goods for carcasses and locker boxes, and solid lumber for face frames, door frames, and trim. The choice of material drives both material cost and finish options. Mudrooms experience higher traffic and moisture exposure than most built-ins, so finish durability matters.
| Material | Sheet Goods | Tier |
|---|---|---|
| MDF | $40 to $65 | Budget |
| Poplar | $55 to $75 (plywood) | Budget |
| Hard Maple | $70 to $95 | Mid-range |
| White Ash | $65 to $90 | Mid-range |
| White Oak | $90 to $130 | Mid-range |
| Walnut | $130 to $200 | Premium |
MDF and poplar: the standard for painted mudrooms
The majority of custom mudroom built-ins are painted, and MDF is the standard panel material because it machines cleanly, holds paint without grain telegraphing, and costs $40 to $65 per sheet. Face frames, door frames, and base molding are built from poplar at $4 to $7 per board foot. For finish durability in a mudroom, specify a two-part conversion varnish or a high-solids alkyd enamel rather than a standard latex paint. These finishes hold up to daily impact, moisture, and cleaning far better. See best wood for furniture for a full species comparison.
White oak: the leading choice for natural-finish mudrooms
White oak has become the most requested species for natural-finish mudroom built-ins in contemporary homes. Its open grain, warm tone, and rift-sawn stability make it ideal for locker panels and face frames. White oak plywood for carcasses runs $90 to $130 per sheet. Solid white oak for face frames and trim runs $7 to $11 per board foot. For a mudroom finish in white oak, a two-part conversion varnish or a hardwax oil (Rubio Monocoat or Pallmann Magic Oil) provides the best balance of durability and natural appearance. See hardwood prices per board foot for current market pricing.
What Drives Mudroom Built-In Costs
Number of lockers and total wall width
High impactEach locker bay adds a carcass, face frame, door, and hardware. A standard locker is 15 to 18 inches wide and 72 to 84 inches tall. Each additional locker adds 3 to 5 hours of carcass construction plus 1 to 2 hours for the face frame section and door. A 6-locker unit takes roughly twice as long as a 3-locker unit, not six times, because installation, scribing, and bench time do not scale linearly. Count the number of household members to set locker count, then add one bay for guests or overflow.
Bench with storage versus open bench
High impactA simple open bench (a seat with no storage underneath) adds 4 to 6 hours of build time. A bench with a hinged lid and storage cavity adds 6 to 9 hours. A bench with a framed base containing drawers or doors adds 10 to 16 hours. The bench run is typically 18 to 20 inches deep and 16 to 17 inches tall. Bench lids require piano hinges or lid-support hardware ($12 to $25 per section) and a durable padded or hardwood top to handle daily use. Storage drawers under the bench require full-extension slides ($20 to $35 per pair).
Upper cabinet section
High impactAdding upper cabinets above the locker section (typically 12 to 16 inches deep and 16 to 24 inches tall) adds a complete cabinet run to the project. A 10-foot upper cabinet section adds 8 to 14 hours of carcass, face frame, door, and hardware work, plus hinge and pull hardware for each door pair. Upper cabinets roughly add 25 to 35 percent to the overall project cost but dramatically increase the storage and visual impact of the mudroom. Upper cabinets also require a crown or scribed fillers at the ceiling, adding 2 to 4 hours of fitting.
Wood species and finish
High impactMaterial cost in white oak versus painted MDF can be 2 to 3 times higher for the same footprint. A 5-locker painted MDF unit uses $400 to $600 in panel materials and $120 to $200 in poplar for face frames. The same unit in white oak uses $600 to $900 in oak plywood and $240 to $380 in solid white oak. In walnut, material cost rises to $900 to $1,400 in panels and $420 to $650 in solid walnut. Harder species also machine more slowly, adding 10 to 20 percent to labor time. Finish type adds cost: spray-applied conversion varnish costs more than brushed paint in both materials and labor.
Coat hooks and hardware type
Medium impactCoat hook quality varies from $8 single hooks to $45 multi-arm hook sets. A standard mudroom locker uses 1 to 2 hook sets per bay, meaning a 5-locker unit requires 5 to 10 hook sets at $80 to $450 in hardware alone. Door pull quality ranges from $8 bar pulls to $35 designer pulls. If the client selects premium hardware, communicate that as a separate line item. Suggest hook sets with 5 hooks each rather than individual hooks for family mudrooms where each person hangs a coat, bag, and one or two extras.
Ceiling height and scribing
Medium impactStandard 8-foot ceilings require a scribed filler strip or crown molding to close the gap between the top of the locker unit and the ceiling. A 9-foot ceiling may require a two-piece stacked upper section or a taller custom locker carcass that exceeds standard sheet goods dimensions. Out-of-plumb walls or out-of-level floors require scribing at both the floor and ceiling, adding 3 to 8 hours of fitting. Document these conditions during the site visit and include a line item for scribing and fitting in your quote.
How to Price Mudroom Built-Ins
Mudroom built-ins combine on-site measurement, shop fabrication, and installation into a single project. Accurate pricing requires separating the locker section, bench section, and upper cabinet section and costing each one individually.
Measure the wall and count lockers
Mudroom built-ins are priced by the locker bay plus the bench run. Measure total wall width and decide on locker count. A standard locker bay is 15 to 18 inches wide per person and 72 to 84 inches tall. Document ceiling height, floor condition, window and door casing locations, electrical outlets, and any HVAC vents or returns. Note whether the floor is level and the walls are plumb, as out-of-square conditions add scribing and shimming time. Confirm whether the client wants upper cabinets above the lockers, a bench below, a bench with storage drawers, or open cubbies at the bottom. Each configuration adds a separate cost layer.
Price sheet goods and solid lumber
Mudroom built-ins use 3/4-inch plywood or MDF for locker carcasses, bench base, and upper cabinet boxes; 1/4-inch plywood or MDF for backs; and solid lumber for face frames, door frames, and trim. A 5-locker unit with bench and upper cabinets (10 feet wide) uses 8 to 12 sheets of 3/4-inch MDF, 3 to 5 sheets of 1/4-inch MDF for backs, and 35 to 55 board feet of solid lumber for face frames and trim. For paint-grade work, poplar is the standard at $4 to $7 per board foot. For natural-finish work, white oak runs $7 to $11 per board foot. Price materials at your supplier cost and apply a 15 to 20 percent markup when billing the client.
Estimate hardware and coat hooks
Hardware for mudroom built-ins includes coat hook sets ($15 to $45 each), door pulls ($10 to $35 each), soft-close hinges ($7 to $15 each), drawer slides for bench storage ($15 to $35 per pair), lid support hinges or piano hinges for bench lids ($10 to $20 each), and adjustable shelf pins if cubbies are adjustable ($0.50 to $2 each). Upper cabinet hardware adds pulls and hinges for each door. A 5-locker unit with a bench and upper cabinets typically requires $200 to $450 in hardware. Pass all hardware through at cost plus a 15 to 20 percent markup.
Estimate labor by phase
Break mudroom labor into phases: site measurement and shop drawings (2 to 3 hours), locker carcass construction per bay (3 to 5 hours each), bench base with storage (5 to 9 hours), upper cabinet section (7 to 12 hours), face frames and trim (6 to 10 hours), doors and drawer fronts (4 to 8 hours), sanding and finish (6 to 10 hours), and on-site installation and scribing (6 to 12 hours). A 5-locker unit with bench and upper cabinets takes 60 to 85 hours total. Multiply by your shop rate ($75 to $120 per hour).
Add overhead and apply profit margin
Overhead covers fixed shop costs including rent, utilities, equipment depreciation, insurance, and consumables not billed to a specific project. A standard overhead rate is 15 to 25 percent of total labor cost. After summing materials, hardware, labor, and overhead, apply a profit margin of 25 to 35 percent on your total cost. A 5-locker painted mudroom wall costing you $9,800 to build sells for $14,000 at a 30 percent margin. Use CraftQuote to enter all line items and generate a professional, itemized PDF for your client.
Example: 5-Locker Mudroom Unit with Bench and Upper Cabinets
10 feet wide, 8-foot ceiling, painted MDF carcasses, poplar face frames and trim, bench with hinged lid storage, upper cabinet run with inset doors, two-part conversion varnish finish.
Build this quote in CraftQuote
Enter your lumber, sheet goods, hardware, labor hours, and overhead. CraftQuote calculates your margin and generates a professional, itemized PDF for your client.
Start a Mudroom Built-In QuoteFrequently Asked Questions
- How much do mudroom built-ins cost?
- Custom mudroom built-ins cost $1,400 to $20,000 or more depending on size, locker count, and materials. A simple painted bench with cubbies and coat hooks (6 feet wide) runs $1,400 to $2,200. A 3-locker unit with a bench and storage base costs $2,800 to $4,200. A full mudroom wall with upper cabinets, lockers, bench, and cubbies (12 feet wide, painted) runs $8,000 to $14,000. The same unit in white oak costs $13,000 to $20,000. These prices include materials, hardware, and labor from a custom woodworker.
- How much do mudroom built-ins cost per linear foot?
- Mudroom built-ins cost $300 to $1,500 per linear foot depending on the configuration and material. A simple bench with open cubbies and coat hooks in painted MDF or poplar runs $300 to $500 per linear foot. A locker-and-bench unit with upper cabinets in painted MDF runs $600 to $1,000 per linear foot. The same configuration in white oak with a natural finish runs $1,000 to $1,500 per linear foot. Per-linear-foot estimates are useful for early conversations but should always be replaced with a full line-item quote once the client confirms dimensions.
- How much does a mudroom bench with storage cost?
- A mudroom bench with storage underneath costs $600 to $3,500 depending on width, depth, and material. A simple 4-foot painted bench with a hinged lid and open storage below runs $600 to $1,100. A 6-foot bench with a framed base, two drawers, and a padded seat costs $1,200 to $2,200. A 10-foot bench integrated into a full locker unit as part of a larger mudroom wall adds $800 to $1,800 to the overall project cost. Bench depth is typically 16 to 20 inches, and seat height is 17 to 18 inches.
- What is the best wood for mudroom built-ins?
- For painted mudroom built-ins, MDF is the standard panel material for carcasses, locker sides, and shelves because it machines cleanly, holds paint without grain showing, and costs $40 to $65 per sheet. Poplar is used for face frames, door frames, and trim at $4 to $7 per board foot. For natural-finish mudrooms, white oak is the most requested species for contemporary homes. Hard maple is a lighter, more affordable option at $5 to $8 per board foot. Mudrooms see higher moisture and impact than other built-ins, so oil or conversion varnish finishes hold up better than water-based topcoats.
- How long does it take to build mudroom built-ins?
- A simple mudroom bench with cubbies takes 20 to 30 shop hours to build and install. A 3-locker unit with a bench and base storage takes 35 to 50 hours. A full 10-foot mudroom wall with upper cabinets, 5 lockers, and a bench takes 65 to 90 hours. A 12-foot full wall with upper cabinets, 6 lockers, and detailed trim takes 85 to 130 hours. Installation typically adds 6 to 12 hours for scribing to walls, floors, and ceilings. Painting adds 2 to 4 hours per coat beyond standard shop sanding time.
- How do woodworkers price mudroom built-ins?
- To price mudroom built-ins, calculate sheet goods and solid lumber costs for carcasses, face frames, bench, and doors, then add hardware at cost plus 15 to 20 percent markup. Estimate labor by phase: shop drawings, locker and bench carcasses, face frames, doors and drawer boxes, sanding and finish, on-site installation, and scribing. Multiply hours by your shop rate ($75 to $120 per hour). Add overhead at 15 to 25 percent of labor, then apply a profit margin of 25 to 35 percent on total cost. Use CraftQuote to build the full estimate and generate a professional PDF for your client.
Related Resources
Cost per linear foot, cabinet types, and how to price custom cabinetry that often accompanies mudroom projects.
Pricing for floor-to-ceiling built-in bookcases and library walls, a common companion project to mudroom work.
Pricing for custom closet built-ins, which share the same locker and carcass construction techniques as mudrooms.
Current price ranges for white oak, walnut, maple, poplar, and 9 other species.
Full pricing methodology: shop rate, labor, overhead, and profit margin for custom woodworking.
Calculate total board footage and lumber cost for your mudroom project.